Big Pix Graphics, Inc.

		CG-75FX
Acceptable sheet width		90mm~1,040mm (3.54"~40.9")
Acceptable roll sheet		Outer less than φ200mm , Roll weight less than 18kg
Effective cutting area*1		760mm x 51m(29.9" x 167')
Maximum auto cutting width*2		870mm (34.2”)
Maximum cutting speed		100cm/s (39.3"/s)
Maximum moving speed		140cm/s (55"/s)
Adjustable speed range*3		1-10cm/s : 1cm step adjustment (0.39"-3.94"/s : 0.39" step adjustment) 10-50cm/s : 5cm step adjustment (3.94"-19.68"/s : 2" step adjustment) 50-100cm/s : 10cm step adjustment (19.68"-39.37" : 3.94" step adjustment)
Mechanical resolution		5µm(0.0002")
Command resolution		25µm or 10µm(0.001" or 0.0004")-MGL-IIc
Repeatability		±0.2mm (Excluding shrinkage / expansion caused by the film temperature)
Pen pressure		400g
Range of down pressure	Cutter	10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
	Pouncing	10~20g(2g step), 20~100g(5g step), 100~400g(10g step)
	Pen	10~20g(2g step), 20~100g(5g step), 100~150g(10g step)
Acceptable sheet*4		Vinyl up to 0.15mm(0.006")thickness, Fluorescent type vinyl Reflective sheet
Acceptable sheet for pouncing*5		Paper thickness: 0.06~0.13mm (0.0024"~0.005")
Applicable tools*6		Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool
Type of command		MGL-IIc
Interface		RS-232C,USB
Receiver buffer size		30MB Standard (20MB when in sorting)
Operational	Temperature	5~35°C (41~95°F)
	Humidity	35~75%(Rh) Non-condensation
Power requirement		AC100V~240V
Power consumption		130VA or less
Dimensions (WxDxH)		1,285mm(50.5")x 700mm(27.5")x 1,217mm(47.9")
Weight (with stands)		50kg(110 lbs.)

* Specifications are subject to change without prior notice

Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

High speed continuous crop mark detection*

An optical sensor enables automatic consecutive detection of registration marks throughout the nested image which the Inkjet printers print, in combination with the automatic correcting feature that allows you to obtain a precise contour cut.

Take-up device

Engineered Head Unit

Automatic sheet cutter mechanism provides great flexibility and enhance performance.

“HALF CUT”mechanism, a proprietary technology of Mimaki

A die cut is a through cut, and a half cut is a cut through half the thickness of the media. Combining die cuts and half cuts makes it possible to produce a series of cuts with only a few joints keeping the image in place. After the cutting, the image can be easily detached with the fingers.

Take-up device

Without sticker pattern

Selectable clamp pressure with high and low setting to permit a more accurate cut.

Selectable jog speed of low/medium/high settings to ensure proper and easy positioning of the head.

You can load media from back or front.

RS232C, USB interface is available.

The media roll holder will hold a total of 6 rolls simultaneously.

Optional and exclusive pen adapter can be used.

Pouncing tool is available as an option.