Big Pix Graphics, Inc.

		JV5-320S
Print Head		On-Demand Piezo Heads (Array of 4 staggered print heads)
Maximum printing width		3,250 mm (128")
Printing resolution		540, 720, 1,440 dpi
Printing mode (Scan x Feed)		720 x 540 dpi; Bi-/Uni-direction
		540 x 900 dpi; Bi-/Uni-direction
		540 or 720 x 720 dpi; Bi-/Uni-direction
		540 or 720 x 1,080 dpi; Bi-/Uni-direction
		720 x1,440 dpi; Bi-/Uni-direction
		1,440 x 1,440 dpi; Bi-/Uni-direction
Ink	Kind	Exclusive solvent ink: either one of ES3 ink or HS ink
	Supply	Automatic change of double ink cartridges
	Capacity	6 color mode:440 cc cartridge x 2/color, 880 cc/color
		4 color mode: 440 cc cartridge x 4/color, 1,760 cc/color
Media specification	Size	Max. width: 3,300 mm (129.9") Min. width: 297 mm (11.6")
	Thickness	1.0 mm or below
	Roll weight	130 kg (286.6 lbs) or below
	Printing surface	Face out/ face in
	Roll diameter	Inside: 3inch / Outside: Less than φ250mm (9.8")
Media cutting		Cutting in Y direction by cutter at the head
Media heater		3 way intelligent heater (PRE/PRINT/POST)
Media take-up device		Automatic take-up device, Inside/outside selectable 3 inch paper bobbin; Outer diameter 300 mm or less
Nozzle checking unit (NCU)		Laser system (Class 1 or below)
Print gap		1.5 mm to 7 mm, step-less & user setting (Automatic detection of media thickness)
Distance accuracy	Absolute accuracy	±0.3mm or ±0.3 % of designated distance, whichever is greater
	Reproducibility	±0.2mm or ±0.1 % of designated distance, whichever is greater (with Media designated by us)
Interface		USB2.0
Power specification		AC 200V to 240V ±10%, 50/60Hz ±1Hz, 30A or below
Power consumption		7,200 VA or below
Operational environment		Usable temperature: 20°C to 35°C , Humidity: 35 to 60%Rh (No condensing)
Outer dimension	(W)x(D)x(H)	5,170 x 1,610 x 1,640 mm or below
Weight		1,200 kg (2,646 lbs) or below

* Specifications are subject to change without prior notice

Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

Secure operation with wider media. Feeding device and take-up device for heavy media.

Feeding device and take-up device can securely feed even heavy media with the width of 3,250mm (128"). Heavy media weighing over 100kg (220lbs.) can be fed with constant tension by means of tension bar and winding device.

Take-up device

Feeding device

Head Height Adjustment.

The thickness of the media is automatically detected and the height of the head is automatically adjusted to get the designated head gap. Even when the thickness of the media is changed, printing can be made with a constant head gap. This enables the user to always obtain the best printing results.

Head gap can be set step-less in 4 positions between 1.5 mm to 7 mm.

Two types of ink ready

HS INK - A solvent ink meeting the needs for high scratch resistance and high-speed high-density printing required for outdoor signboard printing.

ES3 INK - A safe and low odor solvent ink that can be used even in general offices without special exhausting facilities.